Fast Bore Repairs Perth
If your bore has stopped working Virgin Bores will fix it if anyone can. Perth metro wide. That’s what our service team and our electricians do every day!
It would help us to know if your bore is –
Old well liner bore often found in the lower lying areas of Perth.
(a) the old well style with concrete liners and typically a tin “witches
hat” style lid with a pump that is visible when you lift the lid? Does the pump start yet no water? (so probably a priming issue or check valve problem in which case we send our bore serviceman) or does the pump not start at all ? (in which case we send our bore specialist electrician who will repair if simple electrical problem or test and certify the pump motor as fused- possibly then the subject of an insurance claim )
Insurance fusion repairs are our specialty.
or
Typical green lid covering a submersible Perth bore about to be repaired.
(b) a modern bore with submersible pump. Typically you would see nothing at the surface as the small bore lid is under the lawn or maybe
you’ll see a small A4 size green plastic or grey cement lid. We are equipped with winches to pull submersible pumps to the surface if necessary.
If you don’t know where your bore is, no worries, we can advise on how you may be able to find it yourself or we can send a serviceman with locating equipment. We replace fused pump motors.
Insurance fusion repairs are our specialty.
Ready to repair bores and reticulation all over Perth.
We stock a full range of Italian submersible pump motors in our Wangara warehouse to avoid delays if prompt replacement required.
Perhaps your bore pump is continuing to run after the reticulation system has run through its full cycle? Not a problem, just turn it off and call us pronto! We can fix that.
Bore doesn’t seem to have the pressure or flow it used to? Just call the experts at Virgin Bores.
Maybe your water bore pump has tripped the circuit-breaker labelled “pump” or “bore” that should be found in the meter-box. Give us a call and we will send a bore specialist electrician to fault-find and repair.
Perhaps you suspect it is something to do with your reticulation controller not starting the bore?
Whatever the problem, if it is fixable we can fix it.
Electrician repairing a bore in South Perth.
More information on bore pump and motor repair can be found on our
Perth Bore Pump Motor Repair and Service page. Click here.
Perth retic service
Whether your sprinklers run from a water bore or mains water we can fix your reticulation system. Manual or auto, black poly or PVC it is all part and parcel of our serviceman’s day. We have vast local knowledge of all types of Perth irrigation systems. Perth metro wide.
Simply call us on 1300 734 300 email us here or use the form at base of this page.
We service and repair reticulation and solenoid valves.
Does your reticulation system not give the required coverage? We can fix that.
Has one of your stations started always staying on regardless of which station is meant to be on? Perhaps a solenoid valve is faulty? No worries, we can fix that!
Broken sprinkler or pipe? Call us now.
Reticulation controller faulty ot needs reprogramming? We can replace or reprogram.
lost your solenoid valves?
Latest wire tracing and solenoid valve locating equipment. Essential for Perth retic repairs.
Unsure where your solenoid valves are located?
Not a problem, we can send a service-man with a special cable tracing wand to locate them. Designed to help find broken field wires or solenoid valves this specialist valve locating tool does the trick in most circumstances. Can also be used to find lost submersible bores.
automation of existing systems
Virgin Bores are Perth’s experts on automating existing bores and reticulation sytems. If your
bore sprinkler system is currently operated manually with an on / off switch we can easliy fit a fully automatic reticulation controller and interface it to start your bore. Commonly this involves our electrician fitting a 24 volt start relay or contactor to the existing 3 phase DOL ( Direct Online Starter) or single phase start box. Where you may currently switch from one section to another by manual gate valves or taps we can install automatic solenoid valves. Compliance with your rostered water days then becomes automatic.
Reticulation controllers ( timers ) are powered by mains power 240v but have a battery back up so that even in the event of a power failure the programmed memory is retained. This allows you to leave the property for extended periods safe in the knowledge that your irrigation system is programmed to come on automatically.